GYPROC Plaster

 

CRETESTONE

OVERVIEW

GYPROC CreteStone is a skim finishing plaster applied with a skim application method, by using a steel trowel. CreteStone is suitable as a skim finishing plaster for application onto low suction-concrete soffits, concrete pre-cast blocks and Gyproc RhinoBoard.

Key Facts

  • Do not apply when temperature is below freezing.
  • Surfaces to be clean and dust free before application.
  • For internal use only.
  • Please consult your paint vendor/manufacturer on the correct primer for application onto Gypsum surfaces.
  • Application of epoxy paint is not recommended.
  • Not for human consumption.
  • Store inside on a level surface, off the floor, in a dry place protected from the weather.

RHINOLITE

OVERVIEW

  • GYPROC Rhinolite is range of lightweight gypsum plasters, from base coat to finishing plasters.
  • Manufactured for internal application onto a wide range of surfaces, there is a Gyproc Plaster for every application from traditional hand applied skim plastering to machine applied projection.

Key Facts

  • Gyproc RhinoLite plasters are suitable for providing high quality interior surfaces and should be used, with the addition of cold water only.
  • Types of Gypsum Plasters include; Levelling Plasters, Finishing Plasters, Lightweight and Speed Plasters.
  • The Gyproc RhinoLite Range of Plasters include; RhinoLite Multipurpose plaster, RhinoLite Natural Plus Multipurpose plaster and RhinoLite Projection Plaster.

RHINOGLIDE

OVERVIEW  

  • GYPROC RhinoGlide is a smooth setting jointing compound.
  • Gyproc RhinoGlide is a quick setting drywall joint filler for patching, bedding and finishing.
  • This product has been developed specifically to assist the drywall contractor to complete the jointing on drywall jobs within one day. RhinoGlide is packed in 10kg and 25kg bags.
  • It is designed as a filler for plasterboard systems but can also be used as an interior crack filler and for filling rough plaster surfaces prior to painting.

Check List

  • Make sure that the Gyproc RhinoGlide is allowed to set thoroughly between coats.
  • Check that the screws and metal trims are completely covered with compound.
  • Check that all finished joints are smooth and dry for decoration.
  • Check surface generally for smoothness and possible unfinished work.

RHINOBED

OVERVIEW

  • GYPROC RhinoBed is a quality setting adhesive for detailed finishing and fixing and joint filling of Gyproc RhinoArt Cove 75mm and 125mm.
  • Gyproc RhinoBed can also be used in the Gyproc Drylining application.

 

Key Facts

  • Use product within 90 minutes after mixing.
  • Don’t apply when temperature is below freezing.
  • Ambient and background temperature should be between 5-35°C.
  • Surfaces to be clean of dust and oil residue before application.
  • For internal use only.
  • Not for human consumption.
  • Store inside on a level surface, off the floor, in a dry place protected from the weather.
  • Shelf life: 9 months from date of manufacture.